The thinnest electrodes around
With a height of 6.7 mm, the IBT electrodes are the thinnest cased electrodes on the market. Combined with software-based gain adjustment, advanced signal processing, and ease of fabrication, Element is the electrode system for the modern prosthesis.
Enjoy the same snap-in design, now with flat ribbon cables for even smaller form factor and increased durability.
The low-profile shape allows prosthetists to build form-fitting frames. An innovative snap-in design allows for the IBT electrodes to be pushed into the socket and still form a suction seal to secure the socket tightly onto the limb.
Low profile suction seal
Wireless Gain Adjustment
Advanced Signal Processing
The Element system has built-in Bluetooth® for wireless gain adjustment through the Element software. No more unsightly holes for manual gain adjustment – with Element, you can create a truly sealed socket.
Using digital signal processing, Element rejects noise to reduce interference. The companion software enables users to fine-tune the electrode signal to their maximum potential, which includes not only gain, but smoothness and sensitivity.
Easy Installation
Element saves you time in fabrication because it plugs right in, eliminating the need to order separate cables and make difficult cable connections.
Simple electrode dummies help form a sealed pocket for the IBT electrode within a socket. With the pocket formed, IBT electrodes can be snapped right into the socket.
"I would definitely recommend the Element system to other practitioners. It allows a prosthesis to be finished very cleanly without obvious buildup over electrode sites or holes for gain settings."
Sonny Wiggins, CP, LP
Holmes Prosthetic Center
Updated Cables
Subscribe to our Newsletter!
Stay up-to-date on the latest at IBT with our quarterly newsletter.
Copyright Infinite Biomedical Technologies, LLC. 2023
Site Revision 2.0.20
Hello from Baltimore